Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
Nama Produk: | GB19083-2010 Masker Medis Penetrasi Darah Sintetis Tester untuk Pemeriksaan Medis | Lingkungan uji: | Temperature (21 ± 5) ℃; Suhu (21 ± 5) ℃; relative humidity (85 ± 10)% kelemb |
---|---|---|---|
Jarak penyemprotan: | (300 ± 10) mm | Diameter nozzle: | Φ0.84mm, panjang 12.7mm |
Kecepatan ejeksi cair: | 450cm / s; 450cm / s; 550 cm / s; 550 cm / s; 635 cm / s 635 c | Kekuasaan: | AC220V 50HZ |
Menyoroti: | mesin uji ketahanan abrasi,benang twist tester |
GB19083-2010 Masker Medis Penetrasi Darah Sintetis Tester untuk Pemeriksaan Medis
Gambaran:
The mask synthetic blood penetration tester is suitable for the measurement of the spatter penetration performance of medical mask synthetic blood. Masker penetrasi darah sintetis topeng cocok untuk pengukuran kinerja penetrasi hujan rintik-rintik darah sintetis masker medis. It can be used by medical inspection departments, safety inspection departments and scientific research units. Ini dapat digunakan oleh departemen inspeksi medis, departemen inspeksi keselamatan dan unit penelitian ilmiah.
Pperincian
The medical mask sample was supported on the test device, and 2 mL of synthetic blood was sprayed from a cannula with an inner diameter of 0.84 mm in a horizontal direction toward the mask to be tested at a distance of 300 mm. Sampel masker medis didukung pada perangkat uji, dan 2 mL darah sintetis disemprotkan dari kanula dengan diameter bagian dalam 0,84 mm dalam arah horizontal menuju topeng yang akan diuji pada jarak 300 mm. Simulate the scene where the mask is sprayed with blood from the perforated blood vessels, and observe the penetration of synthetic blood on the other side of the mask. Simulasikan adegan di mana topeng disemprotkan dengan darah dari pembuluh darah berlubang, dan amati penetrasi darah sintetis di sisi lain topeng. The medical mask samples were tested at the liquid ejection speeds of 450 cm / s, 550 cm / s, and 635 cm / s, respectively. Sampel masker medis diuji pada kecepatan ejeksi cair masing-masing 450 cm / s, 550 cm / s, dan 635 cm / s. Record the test results for each injection speed. Catat hasil tes untuk setiap kecepatan injeksi.
Standar yang berlaku
GB19083-2010: Persyaratan teknis untuk masker pelindung medis;
YY 0469-2011: masker bedah;
YY / T0691-2008: Metode uji ketahanan terhadap penetrasi darah sintetis dari masker medis untuk peralatan pelindung patogen infeksius (volume tetap, semprot horizontal)
Spesifikasi:
Lingkungan uji | Temperature (21 ± 5) ℃; Suhu (21 ± 5) ℃; relative humidity (85 ± 10)% kelembaban relatif (85 ± 10)% |
Jarak penyemprotan | (300 ± 10) mm |
Diameter nozzle | Φ0.84mm, panjang 12.7mm |
Kecepatan ejeksi cair | 450cm / s; 450cm / s; 550 cm / s; 550 cm / s; 635 cm / s 635 cm / s |
Kekuasaan | AC220V 50Hz |
Kontak Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Faks: 86-0769-3365-7986